label manufacturercustom labels
How to Choose a Custom Label Manufacturer: 7 Questions to Ask
The seven questions that separate a reliable label partner from a vendor that costs you more in reprints, delays, and supply failures.
Read Article →
Short answer: the barcode you need depends on where it has to scan. A UPC gets your product through the checkout. A GS1-128 gets a carton through a retailer’s receiving dock. An SSCC identifies a whole pallet. And a GS1 DataMatrix squeezes more data into a smaller space. Most products that sell at retail end up needing more than one.
Pick by where the barcode scans. On the product at the register → UPC-A / EAN-13. On a shipping carton at a retailer’s dock → GS1-128. On a pallet into a distribution center → SSCC. On a small item, or when you need lot, expiry, and serial in one small code → GS1 DataMatrix. A single product often carries three of these across its journey.
You are not really choosing between barcodes. You are choosing based on what the scanner is looking at and where. Answer one question and the rest falls into place.
Where does this barcode need to scan?
This is the barcode most people mean when they say “I need a barcode.” A UPC-A (12 digits, used in North America) or EAN-13 (13 digits, used internationally) sits on the consumer unit and encodes your product’s GTIN. It is what the cashier scans at checkout.
Use it when the item is sold individually at retail. The one piece of setup that trips brands up: the GS1 Company Prefix behind your UPC is registered by you, through GS1, not by your printer. Once you have your numbers, the print job has to be clean and verified, because a UPC that will not scan is a product that gets benched at the shelf. We walk through the whole process in how to get a UPC barcode for your product.
If you also sell on Amazon, note that fulfillment uses a separate FNSKU barcode on the unit, in addition to your retail UPC.
Once your product ships to a retailer in cases, the carton needs its own barcode, and it is a different animal. A GS1-128 uses Application Identifiers, structured prefixes that tell the scanner what each field means, so one symbol can carry the GTIN (AI 01), batch or lot (AI 10), expiration date (AI 17), and quantity (AI 30) together.
Use it on shipping cartons going into retail supply chains. This is the barcode a retailer’s compliance team checks at receiving, and a bad one is a chargeback. What exactly they inspect, and the four-zone label format they expect, is in GS1-128 label requirements.
When you build full pallets for a distribution center, the pallet itself gets a license plate. An SSCC (Serial Shipping Container Code) is an 18-digit serial number, unique to that one shipping unit, encoded in a GS1-128 barcode on a GS1-standard 4-by-6-inch pallet label.
Use it for palletized shipments into DCs, usually paired with an electronic Advance Ship Notice (ASN). Scanning the SSCC at the dock tells the retailer everything on the pallet without opening a single carton. The mechanics of generating the numbers and the mistake almost everyone makes are in SSCC pallet labels explained.
Linear barcodes need width. When there is not enough room, or you need to pack more than a GTIN into the symbol, you move to 2D. A GS1 DataMatrix is a small square that can hold the GTIN plus lot, expiration, and serial data all at once.
Use it on small items where a UPC will not physically fit, and in healthcare and industrial applications where more data has to travel with the item. We print and verify GS1 DataMatrix to ANSI/ISO on the materials we produce.
Here is the part that surprises first-time brands: these are not either/or. A single product usually carries several barcodes across its journey.
| Where the barcode lives | What it is | What it does |
|---|---|---|
| On the product, at the register | UPC-A / EAN-13 | Sells the unit at checkout |
| On the shipping carton | GS1-128 | Clears the retailer’s receiving dock |
| On the pallet | SSCC | Identifies the whole shipping unit, ties to the ASN |
| On a small or data-heavy item | GS1 DataMatrix | Packs GTIN + lot + expiry + serial into a small square |
A retail product moving into a distribution center can touch three of these: UPC on the unit, GS1-128 on the case, SSCC on the pallet. Each does a different job at a different scan point.
Choosing the right barcode is only half the job. The other half is printing it so it actually scans.
Good to know: Retailers grade barcodes with verifiers, not just scanners, and a grade of C or higher on an A-to-F scale is typically required. A code that looks perfect to your eye can still fail if contrast, bar width, or the quiet zone drifts out of tolerance.
We verify every barcode to ANSI/ISO grade with 100% inline video web inspection before the roll ships, and we provide grade reports on request for vendor qualification. If you want to understand the grade itself, start with what ANSI/ISO verification means, and to decode an actual report, see how to read a barcode grade report.
Still not sure which set your product needs? That is the conversation we have all day. We print and verify all of these in-house, so one supplier can spec the whole chain instead of leaving you to piece it together. See every type on our barcode labels page.
Tell us your product and how it moves through the supply chain, and we will spec the right barcodes and verify every one. Call (908) 495-6235 or request a quote.
A UPC-A barcode (or EAN-13 outside North America) on the consumer unit. It encodes the product's GTIN and is what the register scans at checkout. The GS1 Company Prefix behind your UPC is registered by you through GS1; the manufacturer encodes and prints it so it scans reliably. If you also sell through Amazon, that channel uses a separate FNSKU barcode.
A UPC identifies the individual product at the point of sale and carries only the GTIN. A GS1-128 barcode goes on shipping cartons and uses Application Identifiers to encode several fields in one symbol: GTIN, batch or lot, expiration date, quantity, and more. Retailers scan the UPC at the register and the GS1-128 at the receiving dock. They are different jobs, and most products that sell at retail eventually need both.
When you ship full pallets or cartons into a retailer or distribution center, usually alongside an electronic Advance Ship Notice (ASN). The SSCC is an 18-digit serial number that uniquely identifies that shipping unit, encoded in a GS1-128 barcode on a GS1-standard pallet label. Scanning the SSCC at receiving tells the retailer exactly what is on the pallet without opening it.
GS1 DataMatrix is a 2D barcode that packs a lot of data into a very small space, so it fits on small items and can carry the GTIN plus lot, expiration, and serial fields in one square. It is common in healthcare and on small consumer and industrial items where a linear barcode will not fit. We print and verify GS1 DataMatrix to ANSI/ISO on the materials we produce.
Yes. We verify every barcode to ANSI/ISO grade with 100% inline video web inspection before the roll ships, and we provide grade reports on request for retailer vendor qualification. A barcode that looks fine to the eye can still fail at the register or the dock if contrast, bar width, or the quiet zone drifts out of tolerance, so verification is part of our standard process, not an add-on.
Almost always. A typical retail product carries a UPC on the consumer unit, a GS1-128 on its shipping cartons, and an SSCC on the pallet into the distribution center. Each barcode does a different job at a different point in the supply chain. Send us the product and how it ships and we will spec the full set.
Send us a sample, artwork, or just your specs — we'll quote it fast. Manufacturing in Hillsborough, NJ since 1986, shipping nationwide.